Télécharger Imprimer la page

Senix PSRX2-M2 Manuel De L'opérateur page 13

Publicité

Les langues disponibles

Les langues disponibles

WARNING:
Always wear eye, hearing, hand protection to
reduce the risk of injury when operating the
tool. Keep all parts of your body away from the
rotating bit.
WARNING:
Before cutting any type of material, be sure it is
firmly clamped to prevent slipping.
WORKPIECE AND WORK AREA
SET UP
1. Designate a work area that is clean and well lit. The
work area must not allow access by children or pets to
prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps to
prevent movement while working.
3. There must not be objects, such as utility lines, nearby
that will present a hazard while working. This is
especially critical for plunge cuts.
4. Using a glove, push blade holder all the way back. The
workpiece must be thinner than the minimum blade
extension.
PVC Pipe
WWW.SENIXTOOLS.COM
OPERATION
5. Blade breakage may occur if the blade does not
extend past the shoe and the workpiece during the cut.
Properly sized workpiece is important for operation.
WARNING:
To prevent injury, do not use on workpieces
thicker than the minimum blade extension at
their maximum thickness. Blade tip can strike
workpiece and may shatter.
PVC Pipe
13 - EN

Publicité

loading

Produits Connexes pour Senix PSRX2-M2

Ce manuel est également adapté pour:

Psrx2-m2-0