Senix PSRX2-M2 Manuel De L'opérateur page 12

1. Unpack all parts and lay them on a flat, stable surface:
2. Remove all packing materials and shipping devices, if
applicable.
3. The scope of delivery varies depending on the country
and purchased variant.
Model of PSRX2-M2
• Reciprocating saw x1
• Blade x1
• Battery pack x1
• Charger x1
• Instruction manual x1
4. If you find that parts are missing or show damage do
not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to
people and property.
5. Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
NOTE:
PSRX2-M2 includes charger and battery pack.
PSRX2-M2-0 does not include charger and battery pack.
WARNING:
Wear protective gloves for this assembly work
and always lay the product on a flat and stable
surface while assembling.
Follow the assembly instructions step-by-step
and use the pictures provided as a visual guide
to easily assemble the product!
Do not insert the battery pack before the power
tool is completely assembled or adjusted!
BLADE
WARNING:
Never attach a bend blade or operate the saw
with a loose blade.
To install:
Twist open collet and insert blade as far as into it. Once
released, the blade will be firmly held in place. Pull the
blade to make sure it is securely clamped.
EN - 12
ASSEMBLY
To remove：
Twist open the collet and pull the blade out.
WARNING:
Blade may be hot after use. Make sure it is
completely cooled down before touching.
BATTERY PACK
NOTE:
Prior to installation, lock the switch trigger by trigger lock to
avoid unintentional start.
To install:
Align and slide the battery pack to the docking port until it is
locked in place.
To remove:
Press the unlock button and slide the battery pack out.
WWW.SENIXTOOLS.COM