AC Infinity CLOUDWAY Serie Manuel D'utilisation page 12

INSTALLATION
STEP 5
Loosely attach the duct tube to the fan to
determine the mounting area. Position the fan in
an area where it can be mounted. Remove the
duct tube after positioning the fan.
As an option you may use the included rope
clips to hang your fan from a support beam
instead of mounting it.
STEP 6
Once a location has been set for the fan,
remove the metal rings so you can pull out the
center motor.
Intake and Exhaust
Mounting Flanges
Use the mounting flanges to help you position
the fan to your desired mounting location.
Use a pen or pencil to mark the four
mounting holes.
12