Publicité
Les langues disponibles
Les langues disponibles
Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the product dry or shower and dry it after each use.
•
Periodically clean the product with a damp cloth and a mild detergent or disinfectant. For example, a mild chloride-
based disinfectant may be used. Rinse with warm water after cleaning. Do not use abrasive powders or scouring pads.
•
Check the product for cracks and damage...
•
In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
•
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the product
Check that the anti-slip screws are securely fastened for height adjustment
Check the condition of the board and handle
Check that the brackets are fully attached to the edges of the cabinet
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your product.
•
In a dry and temperate place
•
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on theproduct
elements, do not jam anything...).
TECHNICAL SPECIFICATIONS
812176 :
Dimensions
Lenght adjustment
Weight of the product
maximum user weight
Version Septembre 2023
Length 70 cm x Width 26/30 cm
40.5/65 cm
2.1 kg
113 kg
Anytime
X
X
Every week
X
6
Publicité
