Samsung DVD-P180 Mode D'emploi page 9

CONNECTIONS
CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user's manual of the additional components you are connecting for more information on those
particular components.
Connection to a TV (For Video)
1
Using video/audio cable, connect the VIDEO
(yellow)/Audio (red and white) terminals on the rear of the
DVD player to the VIDEO (yellow)/Audio (red and white)
IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the TV/VIDEO button on the TV's remote
control to select Video.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 10 to 11)
- The number and position of terminals can vary depending on your TV set. Please refer to the user's man-
ual of the TV.
All manuals and user guides at all-guides.com
WHITE
RED
YELLOW
Video Cable
Audio Cable
RED WHITE YELLOW
9