Publicité
to not injure yourself or damage other products or your surroundings. Have someone
EN
help you if the product is too heavy for you to handle on your own (the weight of the
device is indicated on the packaging).
Before using the product, your device may need the handles or brake to be assembled.
To do this, unfold the device (see following sections) and install the brake lever on the
handles as per the following instructions:
An adult must unpack and assemble the device.
1. Before screwing on the handles, install the braking lever on the left-hand side and
adjust the position of the brake lever by screwing it on once the handles have been
installed.
2. Use the markings on the handles to help you. R marks the right-hand handle and L
marks the left-hand handle.
3.3. FOLDING/UNFOLDING THE DEVICE
The unit can be easily folded and unfolded using the folding/unfolding lever. This
operation must always be carried out with care to avoid any risk of pinching or
jamming.
Folding
1. Place the unit horizontally in front of you.
2. Using the button on the lever, lower the lever as shown in the image above.
3. Lower the frame.
Unfolding
1. Unfold the rod.
2. Return stem to original position.
3. Lift the folding system lever until it retracts into the stem. You should hear a
locking click.
3.4. CHARGING AND BATTERY INDICATOR
Charge the battery before first use. To do so, charge the device using the charger
supplied.
WARNING: All charging operations must be performed with the original charger
(charger part number listed in the "CONTENTS AND TECHNICAL DATA" section)
14
Publicité
