Spectro-UV SPECTROLINE EDGE 13 Manuel D'utilisation page 2

EDG-13SBLC KEY FEATURES:
• Nominal steady-state intensity of 4,700 µW/cm
• Large coverage area of 14.5 inches x 13 inches with a minimum UV-A intensity
of 1,000 µW/cm
• Less than 1.0 foot-candle (11 lux) visible light emission.
• Long-lasting UV-A Lenses.
• Black Light Filters included.
• Cool running, fanless design.
• Multiple units can be ganged together, utilizing a single power source.
• Adjustable mounting bracket.
• IP65 Rated: The EDGE™ 13 Series lamps are protected from total dust ingress
and from low pressure jets of water (from all directions). For more details,
consult EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).
• Certificate of Conformance (ASTM E3022-18) included.
• Validation Report (Rolls Royce RRES 90061) included.
• The EDGE™
Meets EN ISO 3059 standards for non-destructive testing.
FIRST USE
• The EDGE™ 13 UV-A LED flood lamp is shipped factory set at the specified
intensity for optimal performance during inspections.
• Carefully unpack and inspect the lamp for possible damage during shipment.
If any damage is noted, immediately notify the carrier and supplier before
attempting to use the lamp.
• Make tests in a darkened area for best fluorescent response.
• Prior to plugging the unit into a grounded receptacle, ensure that the power
switch is in the OFF position. The EDG-13SBLC lamps have a two-position
rocker switch (O = off and I = on).
• Push the power switch to the ON position. Instant-on operation ensures that
each of the UV-A LEDs reaches full intensity very quickly. Check to see if the
unit is operating optimally.
UV emitted from this product. Avoid eye and skin exposure to unshielded products.
All manuals and user guides at all-guides.com
.
2
13 is CE,
WARNING
FOR PROFESSIONAL EXAMINATION USE ONLY
at 15 inches (38cm).
2
CCC, RoHS,
2
and WEEE compliant.