Publicité
Les langues disponibles
Les langues disponibles
4.3 ADVANCED FUNCTIONS - PROGRAMMING THE STROKE, SETTING THE AMMETRIC THRESHOLD AND THE WIND ALARM
THRESHOLD
Requirements: Have a compatible transmitter (see transmitter manual) already programmed on the compatible control panel.
PROCEDURE:
On the transmitter, select the channel paired with the control unit you want to proceed with
to change the settings.
Simultaneously press the key
"up arrow" and the "circle" key,
LEDs 1, 3 and 5 light up.
Briefly press the "circle" button to select the programming
desired on the LEDs:
LED1 = travel programming
LED 3 = programming of the wind threshold
LED 5 = programming of the amperometric threshold
PROGRAMMING
OF THE MOTOR TIME
Briefly press the key "up arrow"
1
2
3
4
5
6
PROGRAMMING
OF THE MOTOR TIME
The motor will automatically perform a
brief opening, a total closure,
A total opening and a total closure.
The control unit emits 2 beeps: travel is
programmed.
PROGRAMMING
OF THE WIND THRESHOLD
Briefly press the key "up arrow":
LED three make some flashes
1
2
3
4
5
6
PROGRAMMING
OF THE WIND THRESHOLD
Briefly press the key
"arrow up" on the corresponding flash
to the threshold you want to set:
1 Flash= 5km/h
2 Flashes= 10km/h
3 Flashes= 15km/h
1
2
4 Flashes= 20km/h
5 Flashes= 25km/h
6 Flashes= 30km/h
7 Flashes= 35km/h
8 Flashes= 40km/h
9 Flash= 45km/h
1
2
3
4
5
6
1
2
3
4
5
6
PROGRAMMING
OF THE AMPS THRESHOLD
Briefly press the key "up arrow":
LED five make some flashes
1
2
PROGRAMMING
OF THE AMPS THRESHOLD
Briefly press the key "arrow up" on the
corresponding flash to the threshold
you want to set:
1 Flash= threshold 1
2 Flash= threshold 2
3 Flash= threshold 3...
3
4
5
6
10 Flashes = threshold 10
NOTE:
threshold 1=
intervention more
reactive (pushing less)
threshold 10 =
intervention less
responsive (push harder)
3
4
5
6
1
2
3
4
5
6
15
Publicité
