Manuels Connexes pour DaVinci Fairway 13523
Sommaire des Matières pour DaVinci Fairway 13523
- Page 1 Item# 13523 Fairway 3 Drawer Dresser Assembly Instructions Commode à 3 tiroirs Fairway Manuel d’assemblage revised 20OCT2020...
- Page 2 Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.davincibaby.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle C. Top Panel C. Dessus B. Right Side Panel A. Left Side Panel B. Panneau latéral A. Panneau latéral droit gauche D. Top Panel Support Rail D. Bordure dessus F. Front Bottom Panel E.
- Page 4 K. Right drawer side (3) K. Côté droit L. Drawer back (3) M. Drawer bottom (3) N. Cross bar (3) de tiroir (3) L. Arrière de tiroir (3) M. Fond de tiroir (3) N. Traverse (3) HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1.
- Page 5 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE (Front) (Avant) (Back) (Arrière) (Back) (Arrière) (Front) (Avant)
- Page 6 (Back) (Front) (Arrière) (Avant) (Front) (Avant) (Back) (Arrière)
- Page 7 (Front) (Avant)
- Page 8 ANTI-TIP KIT INSTALACIÓN DEL KIT INSTALLATION DE LA INSTALLATION CONTRA VOLCAMIENTOS TROUSSE ANTI-BASCULEMENT Children have died from furniture tipover. To reduce the risk of furniture tipover, ALWAYS install tip over restraint provided. Han muerto niños al volcarse los muebles. Para reducir el riesgo de que se vuelque un mueble, SIEMPRE instale la sujeción contra volcamientos incluida.
- Page 9 Find your wall material and follow Determine el material de la pared y Trouvez votre propre matériau mural steps to attach the anti-tip kit to your siga los pasos para instalar el kit et suivez les étapes pour fixer la wall.
- Page 10 Fasten strap to back of dresser. Fije la tira en la parte posterior de la cómoda. Fixez la sangle à l’arrière de la commode. Mark spot on wall 1-2” (25-50 mm) below the top of the dresser. Marque el punto en la pared a 25-50 mm (1-2 pulgadas) debajo de la parte superior de la cómoda.
- Page 11 Fasten strap/bracket by screwing into plastic anchor or wood stud. FIje la tira/el soporte atornillando en la fijación de plástico o el remache de madera. Fixez la sangle/le support par vissage dans l’ancrage de plastique ou le montant en bois. Complete! ¡Listo! C’est terminé!
- Page 12 DRAWER ASSEMBLY INSTRUCTIONS INSTRUCTIONS D'ASSEMBLAGE DES TIROIRS...
- Page 14 Finish Terminé READ ALL INSTRUCTIONS BEFORE USING CHANGER TRAY IS NOT INCLUDED, SOLD THE PRODUCT. KEEP THE INSTRUCTIONS SEPARATELY. CHANGER TRAY M0219 IS FOR FUTURE USE. Recheck all screws and RECOMMENDED. bolts to be sure they are fastened securely. Do not overtighten. LA TABLE À...
- Page 15 ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request.
- Page 16 IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.DAVINCIBABY.COM/PARTS OR YOU CAN CONTACT US BY MAIL: DAVINCI 8700 REX RD., PICO RIVERA, CA 90660 (323) 768-0183 www.davincibaby.com L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à...