Manuels Connexes pour DaVinci 5966
Sommaire des Matières pour DaVinci 5966
- Page 1 Item# 5966 Jayden 6-Drawer Double Dresser Assembly Instructions Commode double à 6 tiroirs Jayden Manuel d’assemblage revised 04JUN2019...
- Page 2 Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.davincibaby.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle A-1. Back Top Cross Bar A-1. Traverse arrière supérieure J. Wood Cleats (2) J. Tasseau de bois (2) B-1. Back Bottom Cross Bar B-1. Traverse arrière inférieure K-2. Left drawer side (6) C-1.
- Page 4 HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H3. 0.8 x 3 cm Wood Dowel (12) H1. Cam bolt (12) H2. Cam lock (12) H3. 0,8 x 3 cm H5. Knob (12) H1. Boulon de came (12) H2.
- Page 6 * Rotate H2 clockwise to secure. * Tourner H2 dans le sens horaire pour fixer. * Rotate H2 clockwise to secure. * Tourner H2 dans le sens horaire pour fixer.
- Page 8 * Rotate H2 clockwise to secure. * Tourner H2 dans le sens horaire pour fixer.
-
Page 9: Drawer Assembly Instructions Instructions D'assemblage Des Tiroirs
DRAWER ASSEMBLY INSTRUCTIONS INSTRUCTIONS D'ASSEMBLAGE DES TIROIRS Do not overtighten. Ne pas trop serrer. - Page 10 * Make sure that the drawer is placed on the tabs on the glide rails. * S’assurer que le tiroir est bien placé sur les onglets des glissières.
- Page 11 * Screw the 9/16” wood screw (H9) in the pre-drilled holes on the drawer side panels. * Visser les vis à bois de 1,4 cm (9/16 po) (H9) dans les avant-trous des côtés du tiroir. * Make sure that the glide touch the drawer front panel.
-
Page 12: Furniture Anti-Tipping Kit Installation Installation Du Dispositif Antibasculement
(REQUIRED) (OBLIGATOIRE) FURNITURE ANTI-TIPPING KIT INSTALLATION INSTALLATION DU DISPOSITIF ANTIBASCULEMENT Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap. Le basculement du meuble sur un enfant peut entraîner des blessures graves ou fatales par écrasement. Pour aider à... - Page 13 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 2” x 4” wall stud Montant de mur de 2" x 4" Locate a 2” x 4” stud behind the wall, and make a mark. Localiser un montant de 2” x 4” derrière la surface du mur et faire une marque.
-
Page 14: Important
READ ALL INSTRUCTIONS BEFORE USING CHANGER TRAY IS NOT INCLUDED, SOLD THE PRODUCT. KEEP THE INSTRUCTIONS SEPARATELY. CHANGER TRAY M0219 OR FOR FUTURE USE. Recheck all screws and M0619 IS RECOMMENDED. bolts to be sure they are fastened securely. Do not overtighten. LA TABLE À... -
Page 15: Care And Cleaning
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. - Page 16 IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.DAVINCIBABY.COM/PARTS OR YOU CAN CONTACT US BY MAIL: DAVINCI 8700 REX RD., PICO RIVERA, CA 90660 (323) 768-0183 www.davincibaby.com L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à...