Best WC35I Mode D'emploi page 11

NON-DUCTED INSTALLATION ONLY
Note:
a. Purchase Model ANKWC35 Non-
ducted Recirculation Kit from your
local dealer.
b. Rooms with 10-foot ceiling require
Flue Extension Model
AEWC345SBN, available from your
local dealer. Discard the upper flue
supplied with the range hood and
replace it with the longer flue
extension.
1. Do not install discharge collar supplied
with the range hood.
2. Attach the 5"-to-6" adapter to blower
discharge and tape joint with aluminum
duct tape. Fig. 14.
3. Install the plenum to the upper decorative
flue using (4) 3.4 x 15 mm screws
provided as shown. Fig. 15.
4. Attach 5-inch expandable ducting to the
plenum and tape joint with aluminum duct
tape. Fig. 16.
- 11 -
FIG.14
FIG.15
FIG.16