Depstech DS350 Manuel D'utilisation page 6

Lens Switching (only applicable to double-lens products):
Long press the
dual-lens.
Lens LED Brightness Adjustment:
Click the key to lower the brightness, and click the
increase the brightness.
Copy photo and video files to computer:
The device does not support USB data cable to transfer data, you can
use a TF card reader to copy data directly.
Introduction to the Menu Interface:
Enter the MENU interface: Press
press /
option interface. Press
1. Resolution Setting: Enter the resolution interface, press
select the resolution, and then press
2. Language Setting: Enter the language setting interface, press
to select the language, and then press
3. Auto OFF Setting: Enter the Auto OFF setting interface, press
to select the time, and then press
4. TF Card Formatting: Enter the formatting interface, choose whether to
format, and then press
5. System Reset: Enter the System Reset Interface, choose whether to
restore the factory settings, and then press
6. Time Setting: Enter the time setting interface, press
year, month, day, minute and second to be adjusted, press
adjust the time, and press
7. Storage Space: Check the memory card capacity and the remaining
memory;
8. Software Version: Check the firmware version number of this product.
button to switch among main lens, side lens and
to select options, and then press
again to exit.
to confirm;
to exit after setting;
04
to enter the menu interface,
to confirm;
to confirm;
to confirm;
to confirm;
key to
to enter the
/ to
/
/
to select the
/ to