Petermann Alpha PM-5050 Mode D'emploi page 13

2.1 Symbols used
Observe the user manual
The distance between free transfer
surfaces using the Sliding Board must
not be more than 20 cm (10 cm in the
case of PM-5020/PM-5024/PM-5025,
deviations see item 6).
2.2 Function check
Transfer products are also subject to a natural ageing process. Inspect the equipment regularly and carefully, in
particular before each use.
Visual inspection
Ensure that material, seams, handle loops
and buckles are undamaged and in
functional order.
Sliding properties
Place the product on a firm surface
Pull your hands over the product with
pressure
Good glide - easy gliding
Low glide: no gliding/moving possible
➢ Defective products may no longer be used!
3 Using the product
3.1 Indication and further use
Due to the wide range of possible applications, the indications cannot be tied to a specific clinical picture, since
flexible Sliding Boards are suitable for all applications involving people who require assistance.
➢
Seated transfer with more supporting surface area and reduced friction.
➢
Maintaining independence with restricted mobility.
➢
Facilitates position changes with and without assistance.
➢
Reduction of shear and friction forces in case of an elevated risk of decubitus.
➢
Protection from injuries due to bed edges, wheelchair wheels or brake levers.
➢
Good adaptability thanks to the flexible material when height differences must be overcome.
PM-50xx – 2023-10
Wipe off
Do not bleach
Do not tumble
Do not iron
Do not dry clean
Warning
13/40
Manufacturer
Batch no. / lot no.
Identification code
Conformity mark
Item number
Medical device label
max. load capacity see item 6
Stability test
Bend product to test stability