SX Lighting TEDDY Notice D'utilisation page 8

ENGLISH – ENGLISH - ENGLISH – ENGLISH - ENGLISH – ENGLISH – ENGLISH
TECHNICAL SPECIFICATIONS

Power supply : AC 90-230V, 50/60Hz

Consumption : 80W

Light source : 7 x 10W RGBW

DMX channels : 7, 12

Working modes : DMX, Master/Slave, Musical

PAN / TILT : 540° / 270°

Dimensions : 170 x 175 x 245 mm

Weight : 3kg
MAIN FUNCTIONS
Turn on the unit, press MENU button into menu mode, press UP and DOWN button until the
required function is shown on the monitor. Select the function by ENTER button. Use UP and
DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press MENU button or let the unit idle one minute to exit menu mode.
In the event of disconnecting with mains power, press UP button for one minute to enter into
menu mode. Press MENU button or let the unit idle one minute to exit.
ADDR : set up DMX address from A001 to A512
CHMD : select DMX channel 7 or 12.
SLMD : select Master, Slave 1 or Slave 2
SOUN : adjust sound sensitivity from 0 to 100
AUTO : select YES or NO
STBY : (=standby) select YES or NO
PAN : select YES or NO for inversion
TILT : select YES or NO for inversion
LED : select YES or NO to switch ON/OFF the display
DISP : select DISP (normal display) or DSIP (display inversion)
TEST : select and ENTER to start an automatic test
HOUR : select to check the running hours of the product
RSET : to reset all functions
To work on the white balance, press on MENU, hold on button ENTER until you see BALA on
the display. Press ENTER. With UP and DOWN buttons, adjust the intensity from 0 to 255 for
RED, GREE and BLU.
 ................................................................................................