Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
FEATURES
1. Control panel
2. Handles (both sides)
3. Water bucket
4. Water level indicator
5. Air outlet
6. Air filter
7. Continuous drain outlet
8. Power cord storage strap
9. Power cord storage band
10. Power cord
1
3
4
6
7
8
10
CONTROL PANEL
1. Auto defrost light: The light will illuminate when frost builds up
on the evaporator coils. The compressor will cycle off and the fan
will continue to run until the frost melts.
2. Bucket full light: The light will illuminate when the bucket is full
or incorrectly positioned inside the cabinet. The compressor and
fan operation will stop as a safety feature. When the bucket is
emptied or correctly re-positioned the dehumidifier will resume
operation automatically.
3. Display: Shows the actual (± 5% accuracy) room humidity level
in a range of 30% to 90%. Otherwise, displays selection when
programming humidity or timer.
4. Smart dehumidify: This function will automatically adjust the
2
humidity level with the fluctuating room temperatures. The
humidity level cannot be adjusted in this setting, it will stabilize
between 45% - 55%. Press the humidity adjust buttons to cancel
this feature.
5. Filter button: The check filter light will illuminate after 250 hours
of operation. After cleaning the filter, press the filter button to turn
off the light.
6. Continuous button: Press to activate the continuous dehumidifying
operation.
7. Fan button: Press to select normal or high fan speed. The light
will illuminate when set to high fan speed.
5
8. Timer button: Press to set the timer.
9. Humidity adjust buttons: The humidity level can be set within
a range of 35% to 85% relative humidity in 5% increments. For
drier air, set to a lower percentage value. For more damp air, set
a higher percentage value.
10. Power button: Press to turn the dehumidifier on or off.
9
4
1
2
5
6
7
3
8
9
10
Publicité
