Publicité
Les langues disponibles
Les langues disponibles
Inserting the battery
1. Push the battery (7) along the guide in-
to the battery holder (5).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release (10)
on the battery (7).
2. Pull the battery out of the battery hold-
er (5).
Switching on and off
WARNING! Risk of injury due to un-
intentional continuous operation of the
tool. Before inserting the batteries into
the unit, check that the on/off switch (14)
works properly and returns to the off posi-
tion when released.
Switching on
1. Insert the rechargeable battery (7) into
the tool.
2. Select the direction of rotation with the
rotation direction switch (2).
3. Press and hold the On/off switch (14).
Switching off
1. To turn it off, release the on/off switch
(14).
2. Wait until the power tool has stopped
before placing it down.
3. When taking a break: Set the direc-
tion of rotation switch (2) to the centre.
These safety measures prevent acci-
dentally starting the power tool.
This allows you to hang the tool on a
belt using the belt clip (6). With the
belt clip you can open bottles with
crown caps.
4. Remove the rechargeable battery (7)
from the device if you are leaving the
device unattended or if you have fin-
ished working.
PARKSIDE app
The PARKSIDE app lets you monitor the
device and control certain functions. The
functions may change with updates to the
app and firmware. For more information
on the PARKSIDE app, see the instructions
for the smart battery.
Requirements
To find the device in the PARKSIDE app,
the following requirements must be met:
• The PARKSIDE app is installed on your
smartphone and Bluetooth® is activ-
ated.
• The following battery is inside the
device: PARKSIDE Performance Smart
battery PAPS 204 A1 or PAPS 208 A1.
This battery is already connected to the
PARKSIDE app.
The device communicates with the app
via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart battery (7).
2. Press the On/Off switch (14).
The "Connected" display (4) flashes
three times. When the device is con-
nected, the "Connected" indicator
lights up continuously.
3. Open the PARKSIDE app.
D ev ic es.
4.
The device is displayed in the list.
If the device does not appear in the
list, add the device manually.
Monitoring and controlling the
device
D ev ic es.
1.
2.
Select the device from the list.
The device overview page is dis-
played.
3.
Select the desired setting on the
overview page.
GB
MT
31
Publicité
