Parkside Performance PASSP 20-Li B4 Traduction Des Instructions D'origine page 22

GB MT
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Impact Wrench
• 3×Socket: 17 mm, 19 mm, 21 mm
• Socket adapter: ½"→ ¾"
• Storage case
• Translation of the original instructions
The rechargeable battery and
charger are not included in deliv-
ery.
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Tool holder
2 Direction of rotation switch
3 Handle (Insulated gripping surface)
4 "Connected" indicator
5 Battery holder
6 Belt clip
7 Battery(not included)
22
8 Button (Charge level indicator)
9 Charge level indicator
10 Battery release
11 LED work light
12 Speed button
13 Display (level)
14 On/Off switch
15 Socket adapter
16 Socket
17 Storage case
18 Battery charger (not included)
Description of functions
The cordless impact wrench has clock-
wise/anticlockwise rotation and a ½"
square drive. The rotary impact function
of the tool converts the force of the motor
into uniform rotary impacts. The striking
mechanism switches on when tightening
and loosening materials.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Impact Wrench
.............................. PASSP 20-Li B4
Rated voltage U ............................. 20 V ⎓
Weight with battery (20 V, 8 Ah) .... ≈4 kg
No-load rotation speed n
–Level 1 ................................ 0–660 min
–Level 2 ................................0-1250 min
–Level 3 ................................0-1550 min
Impact rate
–Level 1 .................................. 0-500 min
–Level 2 ................................0-1500 min
–Level 3 ................................0-1900 min
Torque
–Level 1 ........................................ 130 Nm
0
−1
−1
−1
−1
−1
−1