Publicité
Les langues disponibles
Les langues disponibles
NX85LCDmanual060502.qxd
Recommended Use
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE
• For optimum performance, allow 20 minutes for warm-up.
• Adjust the monitor height so that the top of the screen is at or slightly
below eye level. Your eyes should look slightly downward when viewing
the middle of the screen.
• Position your monitor no closer than 16 inches and no further away than
28 inches from your eyes. The optimal distance is 23 inches.
• Rest your eyes periodically by focusing on an object at least 20 feet
away. Blink often.
• Position the monitor at a 90° angle to windows and other light sources
to minimize glare and reflections. Adjust the monitor tilt so that ceiling
lights do not reflect on your screen.
• If reflected light makes it hard for you to see your screen, use an
anti-glare filter.
• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass
cleaner!
• Adjust the monitor's brightness and contrast controls to enhance readability.
• Use a document holder placed close to the screen.
• Position whatever you are looking at most of the time (the screen or reference material) directly in front of
you to minimize turning your head while you are typing.
• Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-
image effects).
• Get regular eye checkups.
Ergonomics
To realize the maximum ergonomics benefits, we recommend the following:
• Use the preset Size and Position controls with standard signals
• Use the preset Color Setting
• Use non-interlaced signals with a vertical refresh rate between 60-75Hz
• Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue to
insufficient contrast
For more detailed information on setting up a healthy work environment, call Mitsubishi at (888) NEC-MITS,
NEC-Mitsubishi FastFacts™ information at (800) 366-0476 and request document #900108 or write the
American National Standard for Human Factors Engineering of Visual Display Terminal Workstations – ANSI-HFS
Standard No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.
All manuals and user guides at all-guides.com
6/6/02
FOLLOWING WHEN YOU POSITION THE MONITOR:
13
11:44 AM
Page 13
–continued
Publicité
