ROSIERES MIC 20G DFX Manuel D'instructions page 14

Operation Instructions
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press "
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press "
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
will go back to the previous status automatically.
2. Microwave Cooking
Press "
" " for times or turn "
and "P100", "P80" "P50", "P30" or "P10" will display for each added press. Then
press" " to confirm, and turn "
0:05to 95:00. Press "
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press "
2) Press "
microwave power.
3) Press "
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press "
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
", the hour figures will flash.
", the minute figures will flash.
" to finish clock setting. ":" will flash, and the time will light.
", the LED will display "P100. Press
" again to start cooking.
" once, the screen display "P100".
" once again or turn"
" to confirm, and the screen displays "P 80".
" to start cooking .
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
GB
" to choose the power you want,
" to set cooking time from
" to choose 80%
12
", the oven