TP-Link Archer AX10 Manuel De L'utilisateur page 9

1
Install the antennas. If the antennas are already
fixed, move to the next step.
2
Turn off the modem, and remove the backup
battery if it has one.
3
Connect the modem to the Internet (or WAN)
port on your router with an Ethernet cable.
4
Turn on the router, and wait for it to start.
5
Turn on the modem.
Configure via Web
Browser
1
Connect your computer to the router (Wired or
Wireless).
Wired:
Turn off the Wi-Fi on your computer and connect
your computer to the router's LAN (1/2/3/4) port
using an Ethernet cable.
Wireless:
Connect your computer to the router wirelessly.
The SSID and Wireless Password are on the
router's label.
2
Enter http://tplinkwifi.net or http://192.168.0.1
in the address bar of a web browser. Create a
password for future login attempts, or use admin
for both username and password for some
routers.
Note: If the login window does not appear, please
refer to FAQ > Q1.
3
Go to Quick Setup page, and follow the step-
by-step instructions to complete the initial
configuration.
Enjoy!
Now your wired and wireless devices can
connect to the internet !
Note: If you have changed the SSID and wireless password
password to join the wireless network.
English
6