Specifications - Texas A/S BC 335-4 Manuel D'utilisation

Cord cannot be
extended.
Grass getting twisted
around drive shaft
and cord housing.
Cord spool hard to
turn.

16. Specifications

Gears
Handlebar
Weight (kg)
Carburetor
Engine (cc)
Start
Fuel
Fuel tank capacity (L)
Oil
Trimmer cord thickness (mm)
Length with blade (cm)
Spark plug
Blade
Trimmer head
Because of continued product development, Texas A/S reserves the right to improve the
product without obligation, to improve already sold models.
1. Cord melted.
2. Insufficient cord on
spool.
3. Cord worn down.
4. Cord tangled with
spool.
5. Engine RPM too low. Advance cord at full throttle.
1. High grass being cut
at ground level.
2. Trimmer used at low
RPM.
Threads dirty, damaged
or full of grass.
Replace. Trimmer operating too close to
stones and walls.
Fit more cord.
Advance cord while alternatively pressing
and releasing cord housing.
Remove cord from spool, roll on once
more.
Cut grass from top and down.
Use trimmer at high RPM.
Clean threads, lubricate with grease.
Replace spool if necessary.
BC 335-4
Automatic centrifugal clutch
V handle
8.0
Membrane type
33.5
Recoil
Octane 95
0.6
SAE30 / SAE10W-30 – about 50 ml
2.4 mm
190
NHSP AL6RC
3-toothed
Tapn'go 2 cord
25