SNOWJOE AUTOJOE AJV1000 Manuel D'utilisation page 8

Troubleshooting
• Turn off the device before carrying out any maintenance or when checking that all parts are in proper working order.
• To avoid unnecessary hassle, consult the following table before contacting customer service with any mechanical issues.
Problems
Device refuses
to start
Vacuum loses
suction
Motor housing
becomes hot
Possible Cause
• Battery power is low
• Overheating protection
has been triggered
• On/Off button is damaged
• Dust tank is full
• HEPA filter is clogged
• Battery power is low
• The unit has been on
continuously for too long
• Dust tank is full
• HEPA filter is clogged
Possible Solution
• Charge the battery
• Wait until the unit has cooled down before resuming work
• Contact the Snow Joe
®
center at 1-866-SNOWJOE (1-866-766-9563).
• Empty the dust tank
• Clean the HEPA filter
• Charge the battery
• Wait until the unit has cooled down before resuming work
• Empty the dust tank
• Clean the HEPA filter
8
+ Sun Joe customer service
®