Publicité
Electric free-standing fireplace Use instructions
USE AND OPERATION
To turn the appliance on, plug it to a wall socket, and select one of the functions here by described
by pressing the switch buttons found on the side of the appliance:
•For flame effect (no heating function): place the
•For low heating mode, turn on switch " I "
•For high heating mode, turn on switch "I " and " II"
Note: for high heating mode, both "I" and "II" switched must be on
•For temperature adjustment: rotate the themostat knob towards left ("Min") to lower temperature, or
towards right ("Max") to increase temperature
Note: thanks to its automatic operation, thermostat will maintain selected temperature
CLEANING AND MAINTENANCE
Before carrying out any cleaning or maintenance operation, turn the appliance off, unplug it from
wall socket and allow it to completely cool down.
Clean the outer part of the appliance with a soft, slightly damp cloth.
Do not use detergents or polishing products.
TECHNICAL DATA
Input: 220-240V~ 50Hz - 1750-1950W
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
switch on "I"
14
Publicité
