Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
Note:
• To ensure the double-layer filter can be closed smoothly,
the arrows at both ends need to be aligned, and the
middle slot and the rib need to be aligned.
Clean the door filter
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on the filter, You can clean
it in running water.
4. Dry the door filter thoroughly before installing it back.
Note:
• Take notice of the correct orientation before to insert
the door filter.
Clean the heat exchanger
Warning!
Do not touch the heat exchanger with your hand, which
may cause an injury.
• As necessary, approx. once every 3 months, remove the fluff
from the heat exchanger using a vacuum cleaner with a dusting
brush attached.
• Clean the heat exchanger without applying any pressure.
Otherwise the heat exchanger could be damaged. The dryer
will not dry if the cooling fins are damaged or bent.
18
EN
Publicité
