The following conditions require service by a qualified technician:
1. The power cord has become damaged.
2. The unit does not appear to operate normally or exhibits a
marked change in performance.
3. The unit has been exposed to water.
4. Some part of the cabinet or circuitry is physically damaged.
Thank You for Purchasing a Velodyne!
Specifications
Cabinet (H/W/D)
(cm)
Frequency Response 28 Hz – 120 Hz (+/-3 dB)
High-Pass Crossover
Low-Pass Crossover
Amplifier (Class A/B)
Woofer
Magnet
Voice Coil
Inputs
Outputs
Warranty
Weight
Specifications are subject to change without notice.
FOR YOUR RECORDS. . .
Date Purchased_____________________________________
Dealer ____________________________________________
Serial # ___________________________________________
*NOTE: Please complete and return your warranty card within ten (10) days or
Register. . . ON LINE . . . It's faster . . . and easier
DPS-10
17.5" x 14.5" x 18.5"
43.75 x 36.25 x 46.25
Passive 85 Hz (6 dB/octave slope)
40 Hz – 120 Hz (12 dB/octave, 24 dB ultimate)
375 watts Dynamic/
185 watts RMS Power
10" forward firing
(8.2" piston diameter)
40 oz.
2" four-layer copper
Line-level and speaker-level
Line-level and speaker-level
Two years (parts and labor)
53 lbs. (approx.)
www.velodyne.com
11
DPS-12
18.5" x 15.5" x 19.25"
46.25 x 38.75 x 48.13
25 Hz – 120 Hz (+/-3 dB)
400 watts Dynamic/
200 watts RMS power
12" forward firing
(9.9" piston diameter)
55 oz.
2" four-layer copper
60 lbs. (approx.)