Temperature Control; Defrosting Your Appliance - Danby Designer DCF096A2WDD Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions

TEMPERATURE CONTROL

Setting Temperature:
Press the temperature setting key to set or adjust the temperature.
Temperature can be set between -14°C to -24°C (7°F to -11°F).
Recommended temperature setting is -18°C (0°F).
Setting Fast Freeze Function:
The Fast Freeze function allows the unit to run at very low temperature (-24°C ~ -26°C) for
24 hours before reverting to previous settings.
To activate the Fast Freeze function, press and hold the Fast Freeze button for 3 seconds
and the adjacent LED indicator light will illuminate.
To cancel the Fast Freeze function, press the Fast Freeze button or the temperature setting
button and the adjacent LED indicator light will turn off.
Switching Between °C and °F:
To switch between °C and °F, press the °C/°F key and the corresponding indicator light will
illuminate.

DEFROSTING YOUR APPLIANCE

For proper defrosting and cleaning, the following method is recommended:
1. Unplug freezer.
2. Quickly remove all frozen food and store in baskets, cartons or other suit-
able containers. Keep food well covered with blankets to avoid excessive
temperature rise.
3. Remove the drain plug from the freezer, place a tray under the plug and
rotate the drain dial 180 degrees, this will allow the water to drain out of the
freezer compartment.
4. Wipe the interior of the freezer, replace the drain plug and resume freezer
operation as normal.
4

Publicité

Table des Matières
loading

Table des Matières