Publicité
Les langues disponibles
Les langues disponibles
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the
N
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the
N
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 31)
Troubleshooting for Anynet
Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
BN68-850_Eng.indb 62
Media Play (USB & DLNA) feature, sound may not output properly through the receiver.
+
Solution
•
Check if the device is an
•
Connect only one receiver (home theater).
•
Check if the
•
Check the
Anynet
•
Check whether
•
Check whether the TV remote control is in TV mode.
•
Check whether it is
•
Anynet+ doesn't work in certain situations. (Searching channels, Operating Media Play (USB
& DLNA), Plug & Play, etc.)
•
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
•
Check if the
•
Check if the Anynet
(HDMI-CEC) is set to On in the Anynet
•
Press the
TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet
•
Select
View TV in the Anynet
•
Press the
SOURCE button on the TV remote control and select a device other than Anynet
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
•
You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
•
Use the remote control when the Anynet+ setting or switching to view mode is complete.
•
You cannot use the play function when
•
Check whether or not the device supports
•
Check whether or not the HDMI 1.3 cable is properly connected.
•
Check whether
•
Search
Anynet
•
You can connect an
not support Anynet
•
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
•
Check whether the antenna jack on the recording device is properly connected.
•
Connect the optical cable between TV and the receiver.
Receiver is set to On (by disconnecting the power cord or a power failure), the
Anynet
device. The Anynet
+
Anynet
device power cord is properly connected.
+
device's Video/Audio/HDMI 1.3 cable connections.
+
Anynet
(HDMI-CEC) is set to On in the Anynet+ setup menu.
+
Anynet
exclusive remote control.
+
Anynet
Function of Anynet+ device is set on.
+
device is properly connected to the TV and check if the Anynet
+
Setup menu.
+
menu and select a menu you want.
+
menu.
+
Plug & Play is in progress.
Anynet
Anynet
(HDMI-CEC) is set to On in the Anynet
+
devices again.
+
Anynet
device using the HDMI 1.3 cable only. Some HDMI cables may
+
functions.
+
English - 62
View TV
Device List
Recording
:
DVDR
DVDR MENU
DVDR INFO
Receiver
:
On
Setup
Move
Enter
U
E
system supports Anynet
devices only.
+
+
functions.
+
setup menu.
+
Return
R
+
+
2009-06-18
3:55:59
Publicité
