Bergstrom EVER Guide Rapide page 12

EN EVER
INITIAL UNIT CONFIGURATION
The cooler will initially show its software version on the display when powered up for the first
time.
After a few seconds, it will switch to initial settings mode, enabling the vehicle battery type
connected to the unit to be selected from the control panel, either lead (Pb) or lithium (Li). Select
the required option using the up or down buttons on the control panel or remote control, and confirm
with the cooler's ON/OFF button.
To complete the settings, the user must select the temperature measurement scale for the cooler,
in either degrees Celsius (ºC) or Fahrenheit (ºF). Select the required option using the up or down
buttons on the control panel or remote control, and confirm with the cooler's ON/OFF button.
After this last confirmation, the unit will switch to "Stand by" mode and remain ready to power
up.
12
TU ESPACIO DE VIDA CONFORTABLE
QUICK GUIDE GUÍA RÁPIDA
Caution: Before starting up the cooler for the first time, ensure that the main power connection
cable and the battery charge test cable are connected properly.