LA NORDICA INSERTO 70 PRS WIDE Manuel Utilisateur page 25

insTallaTion musT be carried ouT by auThorised personnel who musT provide The buyer wiTh a
sysTem declaraTion of conformiTy and will assume full responsibiliTy for final insTallaTion and as a
consequence The correcT funcTioning of The insTalled producT.
before installing the appliance, carry out the following checks:
• canalization of the warm air (see cap. canaliZaTion).
• Verify if your structure can support the weight of the appliance. In case of insufficient carrying capacity it is necessary to
adopt appropriate measures, la nordica responsibility is limited to the supply of the appliance (see chapter TECHNICAL
DESCRIPTION).
• Make sure that the floor can support the weight of the appliance, and if it is made of flammable material, provide suitable
insulation (DIMENSIONS ACCORDING TO REGIONAL REGULATIONS).
• Make sure that there is adequate ventilation in the room where the appliance is to be installed.
• do noT insTall The appliance in rooms conTaining collecTive venTilaTion ducTs, hoods wiTh or
wiThouT exTracTor, Type b gas appliances, heaT pumps, or oTher appliances ThaT, operaTing aT
The same Time, can puT The room in depression (ref. uNI 10683 standard)
• Make sure that the flue and the pipes to which the appliance will be connected are suitable for its operation. It is NOt allowed
the connection of various appliances to the same chimney.
• The diameter of the opening for connection to the chimney must at least correspond to the diameter of the flue gas pipe. The
opening must be equipped with a wall connection for the insertion of the exhaust pipe and a rosette.
• always leave the recommended air pocket between the appliance and the walls, rear and side min. (see declaraTion of
performance).
• establish the type of ventilation (natural or forced) see chapter venTilaTion hood or adJacenT local.
• By means of the adjustable feet and using a level make sure that the device is perfectly levelled to allow a correct sliding of the door.
after testing the proper Working of the appliance, some days from the installation, it is possible to
proceed With the construction of its aesthetic covering.
Warning - during The surround Building operaTions iT musT kepT in mind possiBle and suBseQuenT
elecTrical insTalled parTs mainTenance (fans, TemperaTure proBe, eTc) and wiTh hydraulic sysTems all parTs
connecTed To The producT.
Warning - When installing inserts, access must be prevented to the internal parts of the appliance
and it must not be possible to access live parts during extraction operations. any Wiring, for example
the poWer cable or room probe, must be positioned so as not to be damaged during movement of the
insert and must not come into contact With hot parts.
La NORDICA S.p.A. DeCLINeS ALL ReSpONSIbILIty fOR DAmAge tO thINgS AND/OR peRSONS CAuSeD by
the SyStem. IN ADDItION, It IS NOt ReSpONSIbLe fOR ANy pRODuCt mODIfIeD wIthOut AuthORISAtION
AND eveN LeSS fOR the uSe Of NON ORIgINAL SpARe pARtS.
your regular local chimney sweep musT be informed abouT The insTallaTion of The appliance so ThaT
he can check The correcT connecTion To The chimney.
ENGLISH 25