Pioneer BDR-XD04 Mode D'emploi page 3

CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: bottom of the unit
CLASS 1
LASER PRODUCT
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
IMPORTANT NOTICE
RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW.
THE NUMBERS ARE ON THE BOTTOM.
BDR-XD04
MODEL NO.
SERIAL NO.
KEEP THESE NUMBERS FOR FUTURE USE.
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or
strong artificial light)
ここを開くとクラス 3B の可視レーザ放射及び不可視レーザ
放 射 が 出 ま す。 ビ ー ム の 目 又 は 皮 膚 へ の 被 ば く は 危 険！
見たり触れたりしないこと。
D3-4-2-1-8*_C_En
D6-8-2-1_En
D1-4-2-6-2*_A1_En
D3-4-2-1-7c*_A1_En