Publicité
Les langues disponibles
Les langues disponibles
Preparing Your Wine Cooler for Storage
If the wine cooler will not be used for a long me, or is to be moved to another place, it will be
necessary to defrost the unit and dry the interior.
1. Disconnect the cooler from the power supply by removing the power plug from the wall socket.
2. Leave the door open to allow for air circula
3. Once the interior is dry and clean the unit will be ready for storage.
Store the unit out of the reach of children. If you have children, you may want to take
such as removing the door to prevent a child from being trapped inside the cooler.
Important: Do NOT touch the power plug when your hands are wet. NEVER unplug the unit by pulling the
plug.
ISSUE
The wine cooler turns on
and o frequently.
The wine cooler does
not turn on.
and to prevent mold, mildew, and unpleasant smells.
POSSIBLE CAUSE
The room temperature is higher
than the recommended ambient
environment.
The door is being opened
The door is not completely closed.
The door gasket is not sealing
properly.
The cooler does not have the
suggested
There is a power failure.
The cooler is not plugged in.
A house fuse has blown or the
circuit breaker is tripped.
Sabbath mode may be enabled.
10
SOLUTION
Run the cooler at the
appropriate ambient
temperature.
Minimize the number of mes the
door is opened.
Make sure the door is completely
closed.
Make sure the door gasket is
properly sealed.
Read and follow the
Clearance Requirements"
Ensure the cooler is plugged
in and the outlet has power.
Plug the unit in to a power outlet
that has
ent amperage.
Replace the broken fuse in your
fuse box or reset the breaker.
Sabbath mode is disabled.
Publicité
