Mutsy Nio Mode D'emploi page 21

· The hood (m)
· The hood can be unfolded by moving it upwards.
· Push and hold the buttons on the sides of the hood. The hood can now
be folded downwards.
Assemble the rain cover on the carry cot (n)
· Make sure that the hood of the carry cot has been unfolded.
· Place the rain cover from top to bottom over the carry cot and make sure
that the rain cover attaches well all around the bottom of the carry cot.
Folding the carrycot
· In order to make the carrycot more compact, it can be folded up.
· Remove the mattress and the interior upholstery from the carrycot
· Unlock the 3 metal brackets by pulling on the loops.
· The carrycot can now be folded up.
Unfolding the carrycot (m)
· Put the carrycot canopy up and pull it upwards.
·
· Reposition the interior upholstery using the Velcro
· Reposition the mattress.
The seat (6 months – 22 kg / 33 lbs)
· The seat is suitable for children from 6 months up to 22 kg / 33lbs who
can sit independently.
· When in the drive position, the seat can be folded and unfolded with the
chassis and does not therefore need to be removed from the chassis.
· The back support and leg support are adjustable.
· Make sure that the chassis has been fully unfolded and the brake is
blocked during all actions indicated below.
Moving the seat unit to face forwards (o)
· Place the attachable elements on the seat into the attachment points
on the chassis and press the seat downwards until you hear a click on
both sides. NB! Place both ridges on the attachment elements into the
chassis attachment points at the same time.
· Check that the chair has been attached solidly by trying to lift it from
the chassis.
Moving the seat unit to face backwards (p)
· Position the seat facing backwards and then insert the attachment clips
on the seat in the attachment points on the frame and push the seat
EN
rm.
21