Publicité
Les langues disponibles
Les langues disponibles
How to get to the main menu
Press the
time and hold them for 2 seconds. The
main menu will appear.
How to navigate in the menu and change
settings:
•
•
•
Unit headtop setting:
Go to the unit menu (
and repeat pressing
headtop standard appears.
9. Storage
All parts of the CleanAIR® system must be stored at temperatures between -10 °C and 55 °C, with relative air humidity between
20 and 95% Rh.
Batteries will self-discharge during storage. Therefore, it is recommended to charge the battery for 1 hour at least every 3
months. The optimal battery charge level for longer storage is between 50 - 70% of capacity. After longer storage time it is
necessary to repeat 3 charging cycles to reach battery's full capacity.
10. Warranty
The warranty ensures that you will receive a replacement if a product has any manufacturing or material defects that appear
within 12 months of the date of purchase. The same period for batteries is 6 months from the date of purchase. The warranty
claim must be reported to the sales department/retailer. At the same time, proof of purchase must be submitted (i.e. an invoice or
certificate of delivery). The warranty can only be acknowledged if no interventions into the powered respiratory unit and charger
have been made. The warranty does not cover defects caused by the late replacement of filters, or by using a filter which was
damaged by cleaning or being blown through.
The manufacturer strongly recommends to perform periodical inspections in CleanAIR® authorized service center. Inspections
should be done according the local law and at least once in every two years.
11. Certification
Explosion protection sign
Equipment group
(explosive environments outside underground parts of mines)
Category 3 (gaseous atmospheres)
Group IIB (also complies with IIA requirements)
Temperature class, gas (maximum surface temperature 135 ° C)
EPL protection level
Explosion protection sign
Equipment group
(explosive environments outside underground parts of mines)
Category 3 (dusty atmosphere)
Group IIIC (also complies with IIIA and IIIB requirements)
Temperature class, gas (maximum surface temperature 135 ° C)
EPL protection level
12
and
button at the same
Press the
button and jump to the
next menu item, or hold the
for 2 sec to jump to the previous item.
Press the
button and change the
settings of the item.
Press both buttons for 2 seconds to
save the settings and leave the menu
(not pressing anything for 5 sec does
the same).
and
until the required
How to change the filter setting:
Go to the unit menu (
once to get to the next item; repeat pressing
until the required filter standard appears.
Available
languages
button
•
English
•
French
•
German
•
Czech
•
Norwegian
•
Dutch
•
Italian
•
Spanish
•
Russian
for 2 sec)
•
Hebrew
•
Polish
•
Finnish
II 3 G IIB T4 Gc
II 3 G IIB T4 Gc
II 3 D IIIC 135°C Dc
II 3 D IIIC 135°C Dc
and
for 2 sec) and press
How to change the language
To change the language, go to
the menu (
and
at the same
time for 2 seconds) and then to
the language item* (press the
button four times); press the
button to select the required lan-
guage. By not pressing anything
for 6 seconds your settings will
be confirmed.
* In order to ease finding "lan-
guage item" is highlighted by
symbols ">" and "<".
Publicité
