Publicité
L920-B2
Bollard with Mounting Bracket
Parts
LED unit with B2 canopy x 1
B2 mounting bracket (MB) x 1
Set screws x 3
Waterproof wire nut x 2
Mounting screws — Not included
Allen key — Included
1) Connect fixture leads to
box wiring using supplied
waterproof wire nuts. Line
voltage power must be off
before connecting driver.
2) Use two mounting screws to
attach mounting bracket to
surface.
3) Attach B2 canopy to pipe
stake, securing with 3 set
screws.
Optional: Apply weather proof
bead of silicone all the way
around canopy.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
line
connect
neutral
to mains
ground
All technical information in this document is subject to change. Copyright © MP Lighting.
LED unit
B2 Canopy
Set screw
Waterproof wire nut
Mounting screws
Mounting bracket (MB)
positive
(red)
LED driver
negative
(blue)
connect
to fixture
08-2023
Publicité
