Publicité
L920-B4
Bollard
Parts
LED unit with B4 canopy x 1
Universal crossbar x 1
Set screw x 1
Mounting screws x 4
Waterproof wire nut x 2
Allen key — Included
EBX-OCT1 electrical box — Sold separately
MK3 Mounting kit — Sold separately
1) Follow instructions for Mounting
Kit (MK3)
2) Once electrical box is in place
connect fixture leads to box
wiring using supplied waterproof
wire nuts. Line voltage power
must be off before connecting
driver.
3) Align crossbar to electrical box
and attach with mounting screws.
4) Mount canopy to crossbar by
hooking one side of the crossbar
on first then secure the otherside
by tightening set screw (M4) with
provided allen key.
Optional: Apply weather proof
bead of silicone all the way
around canopy and gasket.
For outdoor application use exterior
rated enclosure compatible with
local electrical code.
For cast in concrete use appropriate
box rated for cast in concrete.
Consult local electrical code.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
Allen key
Set screw
line
connect
neutral
to mains
ground
All technical information in this document is subject to change. Copyright © MP Lighting.
B4 Canopy &
LED unit
Mounting
Screws
Universal
crossbar
Gasket
Waterproof
wire nut
4" waterproof
electrical box
EBX-OCT1
MK3 mouting kit
positive
(red)
LED driver
negative
(blue)
connect
to fixture
08-2023
Publicité
