Recharging The Battery - Spypoint KIT-12V Manuel D'utilisation

RECHARGING THE BATTERY

KIT-12V
To recharge the battery, connect the AC charger to "12V
charger" plug. The light will turn from red to green to indicate
that the battery is fully charged. The charger will automatically
stop recharging when the green light appears.
Note: When the AC charger is connected to the case, there
may be a delay of up to 1 minute before the green light turns
red to indicate that the battery needs to be charged.
BATT-12V
To recharge the battery, plug the "alligator " clips from the AC
charger in the battery. Exact polarity must be followed (red =
-
+
, black =
indicate that the battery is fully charged The charger will
automatically stop recharging when the green light appears.
Note: When the AC charger is connected to the battery, there
may be a delay of up to 1 minute before the green light turns
red to indicate that the battery needs to be charged.
). The light will turn from red to green to
5