Télécharger Imprimer la page

Hoover TE70 TE10011 Telios Plus Manuel D'utilisation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
GETTING TO kNOw yOUR ClEANER
A.
Cleaner main body
B.
On/Off Button
C.
Cord Rewind Button
D.
Variable Power Control*
E.
Bag Check Indicator
F.
Bag Door Release Latch
G.
Bag Door
H.
Pre-motor Filter
I.
Exhaust Filter
J.
Exhaust Filter Cover
K.
Accessories door
L.
Hose Handle
M.
suction Regulator*
N.
Hose
O.
Telescopic Tube*
P.
Telescopic Tube Adjuster*
Q.
Carpet and Floor nozzle(GP)**
Q1. Carpet Nozzle (CA)**
Q2. Hard Floor Nozzle (HF)**
R.
Floor type selector
s.
Crevice Tool
T.
Furniture Nozzle
U.
Dusting Brush
V.
Pet Hair Remover Mini Turbo Nozzle*
W.
Allergy Remover Mini Turbo Nozzle*
X.
Grand Turbo Nozzle*
Y.
Parquet Nozzle*
ASSEmBlING yOUR ClEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release the hose: simply press the two latches on the hose end and pull. [2]
2. Connect the handle to the upper tube end. [3]
3. Connect the tube lower end to the carpet and floor nozzle**. [4]
*Certain models Only
** Certain models only, nozzles may vary according to model
All manuals and user guides at all-guides.com
2
USING yOUR ClEANER
1. Extract Power Cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [5]
2. Adjust the Telescopic Tube* to the desired height by moving the Telescopic Tube
Adjusters* up and raise or lower the handle to the most comfortable cleaning position. [6]
3. Carpet and Floor Nozzle**: Press the floor type selector pedal on the nozzle [7] to select
the ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the On/Off button on the cleaner main body. [8]
5. slide the Variable Power Control* to increase or decrease the suction. [9]
6. Adjust the suction regulator* to the desired level. [10]
7. switch off at the end of use by pressing the On/Off button. Unplug and press the Cord
Rewind Button to wind the power cord back into the cleaner. [11]
8. Parking and storage - The tube can be parked for temporary storage [12] while in use,
or in the storage position when not in use. [13]
ClEANER mAINTENANCE
Replacing the Dust Bag
If the Bag Check Indicator is illuminated please check and if necessary, replace the dust bag.
1. Lift the bag door release latch [14] to open the bag door, close the bag to avoid dust
escaping by pulling the tongue and remove the bag. [15]. The full dust bag should be
disposed of correctly and carefully.
2. Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder [16].
3. Close the bag door.
Remember: The bag check indicator may be red if an obstruction has occurred. In this
case, refer to 'Removing a Blockage From the system' .
Cleaning the Filter
To maintain optimum performance of your cleaner, please wash the pre-motor filter and
exhaust filter after each 5 bag changes.
Cleaning the pre-motor filter:
1. Lift the Bag Door Release latch [14] to open the bag door and remove the bag. [15]
2. To remove the pre-motor filter slide the pre-motor filter frame from the cleaner. [17]
3. Remove the filter from the holder. [18]
4. Wash it in hand warm water, [19] and allow it to dry thoroughly before replacing it in
the cleaner.
GB

Publicité

loading