Candy CCE4T618EB Mode D'emploi page 9

WiFi Use
To activate the Wi-Fi, long press the mode key for 2 seconds, the Wi-Fi icon will turn on and an acoustic
signal is made.
If the Wi-Fi has not been configured yet, when the refrigerator turns on, it will automatically enter the
configuration mode and keep this status for 30 minutes. To use the configuration mode:
•
Press the mode key for 2s but less than 8s, the refrigerator enters the Wi-Fi configuration
mode and an acoustic signal is made. The Wi-Fi icon starts blinking.
•
Follow in app instructions to configure the Wi-Fi (see above).
•
Once the Wi-Fi is configured and the connection established, the Wi-Fi icon is on and fixed.
•
After 30 minutes without performing any operation, the Wi-Fi will automatically exit the
configuration mode.
•
If the Wi-Fi has already been configured, it will automatically reconnect according to the
configuration information.
DOOR REVERSIBILITY
Tools needed: screwdriver
1. Remove the top hinge cover
2. Unscrew the top hinge
3. Remove the top hinge cover (left)
4. Remove middle hinge
EN 7