Brevi agri b35 S Manuel D'utilisation Et D'entretien page 42

6.3.8 REPLACING HOES
Operator
DANGER
Before carrying out maintenance regarding cutting
hoes put the machine in a safety position (see "6.2
Machine in safety position").
When servicing or replacing hoes with the lifted machi-
ne, put stands under the machine. Prevent risk of being
crushed if the machine falls.
•
•
•
•
•
•
•
FIG. 18
DANGER
DANGER of falling. When the rotor is rotated with a
lever, the hoes might hit the ladder or lifting gear on
42
which the operator stands to reach higher hoes; take
care and check that the hoes do not come into contact
with anything that could make the operator lose balan-
ce. Take all the possible precautions, proceed carefully
and plan all the work steps.
CAUTION
The bolts that holding the tools must have their heads
on the side of the tool, and the nut on the side of the
support. Comply the driving torque value.
BOLT DRIVING TORQUE (NM)
Classe 6.6
15
51
173
242
321
411
BREVIAGRI
FIG. 19
6.3.9 REPLACING OIL IN CENTRAL TRANSFER
CASE
SKILLED STAFF
b35 s
8.8 10.9 12.9
26 36 44
52 74
127 153
143 241
214 361
433
431 727
571
731 1234
-
-