Publicité
Les langues disponibles
Les langues disponibles
Installation (Continued)
Q Mounting Options
If the unit is installed at 22.5°, attach the dust seal to the same
position as in horizontal installation.
If the unit is installed at
Horizontal installation
67.5°, attach it to the same position as in vertical installation.
EN
Fasten the mounting brackets to both sides of
2
Select a location to install the unit on the car-
the unit with hex bolts with double washers
pet.
(M5 x 10).
O Mounting
Bracket (L)
Bracket x 2
@ Double-Faced Adhesive Tape x 2
|
O Base
|
© Hex.Bolt with Double
Washers (M5 x 10) x 4
e Install the unit with 2 double-faced adhesive
© Mounting Bracket (R)
|
tapes @.
Cut the carpet in a cross where the bracket
4
install the unit with 4 hex.nuts €.
bolts are to pass through.
© Hex.Nut (M5) x 4
O Base Bracket
e Install the base brackets and double-faced adhe-
sive tapes under the carpet.
16
CX-DP610EUC
Publicité
