Beurer MG 330 Mode D'emploi page 18

5. "NECK" massage: Press the NECK button
NECK button again will change the direction of rotation. Press the NECK button
11
to switch off the massage in the neck area. The LED light for "NECK" on the hand switch will go out.
6. Maximum application time/automatic switch-off: As soon as the Shiatsu seat cover is switched on,
the automatic switch-off function will be activated automatically and preset to 15 minutes.
 CAUTION
Use the massager for max. 15 minutes and then leave it to cool down. Long massages can lead to
over-stimulation of the muscles, creating tension instead of aiding relaxation. You can end the massage
at any time by pressing the ON/OFF button
position in the lumbar area when the device is switched off. This is indicated by a flashing LED light.
Once this position is reached, the Shiatsu seat cover switches off.
7. At the end of use: Do not disconnect the Shiatsu seat cover from the power supply while it is in oper-
ation. Always switch it off first and then wait until it has reached its start position.
6.4 Other applications
Seat cover
The seating surface of the massage seat cover is attached to the back area via a zip fastening. You can
open this to use the seat cover separately. You can also use it as a back rest.
Combination with heat pad
The massage seat cover can also be used with all beurer heat pads measuring 40 x 30 cm / 44 x 33 cm. To
do this, place the heat pad in the cover via the zip fastening on the underside of the seat cover. The heat
pad should lie on the inner padding in the direction of the seating surface. The cable for the heat pad can
be guided out through the buttonhole on the side of the seat cover. It can be used during the massage as
well as also separately for the back or the feet.
To purchase beurer heat pads, visit the webshop www.beurer-shop.de
7. CLEANING AND MAINTENANCE
Cleaning
 CAUTION
• Unplug the device each time before cleaning.
• Clean the device using only the methods specified. Liquid must not penetrate the device or the acces-
sories under any circumstances.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry deter-
gent where necessary. Do not use any solvent-based cleaning products.
• The removable covers of the seat and neck area are washable at 30°C. Please note the symbols for
care and cleaning on the label sewn into the cover.
• Do not use the device again until it is completely dry.
• You can remove the neck cover by releasing the hook-and-loop fastener. The seat section can be
removed from the back section using the zip fastening. Before washing, open the zip fastening on the
seat cover and remove the padding. Once the covers have dried, you can reattach them.
Care
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packaging in a dry environment, ensuring it is not weighed down by additional items.
to activate the massage in the neck area. Pressing the
11
. Note that the massage heads
18
18
again in order
11
will return to their start
4