Hamilton Beach HBF2064 Mode D'emploi page 7

Setting the Temperature Control
Your unit has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.
Set temperature range: Fahrenheit degree mode
1. Fridge temperature range: 32~43°F (Default value 38°F)
2. Freezer temperature range: -10~5°F (Default value -2°F)
• The first time you turn the unit on, the unit will start at the factory-set default
temperature, which is 38°F in the refrigerator compartment and -2°F in the freezer
compartment.
• The first time you turn the unit on, adjust the temperature in the refrigerator
compartment to 34ºF and run for at least 4 hours before placing food inside. This will
ensure that the freezer compartment is thoroughly chilled and the refrigerator
compartment is stabilized before food is placed inside. Then adjust the temperature
setting to your desired setting.
• To adjust the temperature in each zone, press the appropriate zone button, and the
selected zone will flash on and off. The temperature will change according to the pre-set
temperatures as shown below. You will hear a bell chime with each press of the control
panel buttons.
Temperature Control
5
Function