Member's Mark 720-0778C Instructions D'assemblage page 14

2d) Align the bottom key holes on side shelf
with 2 loosened screws on side panel. Hang
the side shelf (C) to the cart on the two
loosened screws on the side panel. Hook the
side shelf into the two screws. See Fig.7.
Tip: This step is meant to help with the
installation but do not depend solely on the two
screws to hold the weight of the side shelf.
2e) Insert the three screws removed in Step
(2c) from inside of the fire box through the side
shelf. Tighten screws from inside the fire box.
See Fig. 8.
2f) Tighten the two screws loosened in step
(2a). See Fig. 8.
2g) Attach the side shelf panel to the main
control panel by tightening the screw removed
in step (2b) from underneath the side shelf.
Screws pass through the side shelf control
panel to the main control panel. See Fig. 8.
Assembly Instruction
Fig.7
C
Fig.8
13
continued