Würth STP 150 POWER-S Traduction Des Instructions De Service D'origine page 14

OBJ_BUCH-1626-001.book Page 14 Thursday, March 1, 2012 2:12 PM
Symbol Meaning
Before any work on the
machine itself, pull the mains
plug from the socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Next step of action
Sawdust blower device
Extraction
Mitre/Bevel Angle
Low stroke rate/speed
High stroke rate/speed
Switching On
Switching Off
On/Off switch lock-on
Prohibited action
Correct result
Symbol Meaning
Saw with moderate pressure in
order to achieve optimal and
precise cutting results.
When sawing metal, apply
coolant/lubricant alongside the
cutting line
Art. No.
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
/II Symbol for protection class II
(completely insulated)
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h
Delivery Scope
Jigsaw, splinter guard and extraction kit.
Parallel guide, sliding shoe, application tools and
other accessories shown or described are not part of
the standard delivery scope.
Intended Use
The machine is intended for making separating cuts
and cut-outs in wood, plastic, metal, ceramic plates and
rubber while resting firmly on the workpiece. It is suita-
ble for straight and curved cuts with mitre angles to 45°.
The saw blade recommendations are to be observed.
For damage caused by usage other than intended,
the user is responsible.
14