Parkside PKH 3000 B1 Instructions D'utilisation Et Consignes De Sécurité page 27

Make sure that the details
on the rating label are in
conformity with your mains
voltage. Only connect the
product to alternating current
with an earthing contact as
otherwise a protection against
electric shock is not provided.
In the event of malfunctions,
remove the mains plug from the
mains socket.
Cleaning and storage
Disconnect the product from
the wall outlet during periods
of disuse and before cleaning.
Instructions on cleaning the
product: see "Cleaning and
care".
Store the product in a cool,
dry place protected from
sunlight and out of the reach of
children.
28 GB/IE
˜ Before first use
Remove the packing materials.
Check the product for any damages.
NOTE: The product may give off some
vapours or odours during first use. These
are production or transport residue that will
quickly subside. There may also be quiet
noises such as clicking or crackling. These
will also quickly subside once the plastic
parts have finally adjusted to the operating
conditions.
˜ Operation
˜ Set-up location
Place the product on an even, stable surface.
Maintain the following clearances around
the product:
– 30 cm to the left, right, top, and rear
– 100 cm to the front
˜ Turning on
Set the temperature control
heating level switch
Connect the power plug
RCD-protected socket-outlet.
NOTES:
Make sure that the supply voltage of
the socket-outlet meets the requirements
described in the "Technical data" chapter.
Make sure that the power plug
inserted into the socket-outlet.
to and the
[ 3 ]
to 0.
4 ] [
to an
7 ] [
is fully
7 ] [