Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
6
AV1 (A
/V
UDIO
IDEO
T
he TV's audio/video input jacks
are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV1 and AV2 Input Jack connections
are shown on this page, but either
one can be connected alone. Follow
the easy steps below to connect your
accessory device to the AV1 and AV2
IN Jacks located on the back of the
TV.
1
Connect the VIDEO (yellow)
cable to the VIDEO AV1 IN (or
AV2 IN) jack on the back of the
TV.
2
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV1 IN (or AV2 in)
jacks on the rear of the TV.
3
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on
the back of the VCR (either one
or two) or accessory device being
used.
4
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
5
Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the AV button or the CH+
or CH- buttons to set the TV to its
AV1 or AV2 channel.
7
With either of the VCRs (or
accessory devices) ON and a pre-
recorded tape (CD, DVD, etc.)
inserted, press the PLAY button
to view the tape on the television.
H
H
ELPFUL
INT
Audio and video cables are not sup-
plied with the TV, but are available
from Philips or electronics retailers.
)
AV2 I
C
AND
NPUT
ONNECTION
Back of TV
AV1
Connection
Back of VCR
VCR One (or accessory device)
(Equipped with Audio and
Video Output Jacks)
AV2 Connection
VCR Two
(or accessory device)
(Equipped with Video
and Audio Output
Jacks)
Video In
(Yellow)
Audio In
(Red and
White)
POWER
VCR
DVD
SAT
AMP ACC
8
SLEEP
Select
AV
ACTIVE
CC
CLOCK
7
3
4
CONTROL
SOUND
PICTURE
Publicité
