Publicité
EN
字号: 18 pt
General
Guidelines
Please read the following instruction carefully
and use the product accordingly.
Please keep this manual and hand it over
when you transfer the product.
This summary may not include every detail of
all variations and considered steps. Please
contact us when further information and help
are needed.
Warnings
Children are not allowed to assemble the
product. During assembly, keep all small
parts out of the reach of children as they
may be fatal if swallowed or inhaled.
Children are forbidden to climb or play on
the product to avoid serious bodily injury
caused by the toppling.
Keep plastic packing bags out of reach of
children to avoid any potential danger, such
as suffocation.
The total maximum static load capacity of
the product is 136 kg (300 lb). Do not place
overweight items on it.
The product should be attached to the wall
with the included anti-tipping kit to prevent
personal injury caused by accidentally
tipping over.
Notes
The product is intended for indoor use only. The product must be assembled and used in
accordance with the provisions of the manual. Personal injury and/or damage to product
may occur if products are used outside of their intended purposes and/or if products have
been changed/modified from their original design. The seller does not assume any
responsibility or liability with respect to any injury/damage caused by incorrect assembly or
improper use.
Avoid long-term exposure to humid environments to prevent mildew.
Keep the product away from fire sources and high temperatures. Do not expose the
product to direct sunlight.
Do not place any hot objects on the surface of the product.
If there are any defective or missing parts after unpacking, please cease assembly
immediately and contact us.
Please assemble the item on a spacious surface and do not place the unwrapped product
directly on the ground to avoid product damage.
Please do not stand or sit on the wooden boards.
Please wear gloves during the assembly and/or disassembly process to avoid scratches
from any sharp edges.
Please match the corresponding part and fitting based on the part number in the
manual.
If the part does not match with the fitting, please check the piece as specified in this
manual.
During assembly, first loosely align all screws with the corresponding pre-drilled holes and
then tighten the screws one by one.
Periodically inspect screw tightness while the product is in use. If necessary, retighten to
ensure structural integrity.
If you accidentally spill water or another liquid on the surface, immediately wipe clean
with a dry towel.
Please keep the product away from sharp, pointed objects and corrosive substances to
prevent product damage.
Please place this item on level, solid ground during use.
27
Publicité
