Medion MD 11960 Guide De Démarrage Rapide page 88

. Preparing the ice cube maker
The user manual contains the instructions for cleaning.
 Check the ice cube maker for transport damage.
 Place the appliance on a level, non-slip and heat-resistant surface.
 Before using the ice cube maker for the first time, wait 2 hours after setting it up.
Leave the water tank cover open for at least 2 hours.
 Before first use, clean the accessories (ice container, ice scoop) and the appliance
with a soft, slightly damp cloth. Allow everything to dry thoroughly.
 Attach the ice container handle to the ice container using a slotted screwdriver.
 Run the cleaning function ('Cleaning the ice cube maker' in the user manual).
The appliance is now ready for use.
The appliance is driven by an electric motor. This can lead to a slight
smell during initial operation. This smell is normal and is not a sign of a
malfunctioning appliance. Ensure that there is adequate ventilation.
. Using the ice cube maker
NOTICE!
Risk of damage!
The use of additives such as syrups or dyes can cause
damage to the water sensor and pump.
 Use only clean drinking water with no additives.
 Fill the drinking water tank to the MAX mark. Do not fill above the mark.
 Put the water tank cover on.
 Slide the ice container onto the guide rails and slide it into the appliance.
 Connect the appliance to a properly installed socket.
The button flashes and shows the standby status.
 Press the
button to start making ice.
The indicator light
The appliance starts by making ice nuggets.
You can remove the ice container and remove ice at any time during ice production.
 Empty the ice container and restart the process by pressing the
turn off the unit and unplug the mains plug.
and the button illuminate.
DE
FR
NL
ES
IT
EN
button or
89