Westpoint YAP1F7 Manuel D'utilisation page 8

Remote Controller YAP1F7
2 Preparation before operation
When using the remote controller for the first time or after replacing
the batteries, please set the time of the system according to current time
in the following steps:
(1) Pressing "CLOCK" button, "
(2) Pressing "
decrease rapidly.
(3) Press "CLOCK" button again to confirm the time and return to
display current time.
3 Introduction of operation function
3.1 Selecting operation mode
Under on status, press "MODE" button to select operation mode in
following sequence:
NOTE:
The supported modes of different series of models may vary, and
the unit doesn't execute the unsupported modes.
3.2 Setting temperature
Under on status, press "
and press " " button to decrease setting temperature. The range of
temperature is 16°C ~ 30°C (61°F ~ 86°F).
" or " " button, the clock time will increase or
" button to increase setting temperature
3
" is blinking.