Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
Carbon filter
Lighting
Lamp
Power (W)
4
Removing the grease filters
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Remove the filters one by one, after
having disconnected the relative fastening elements.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the motor.
3. Replace the filter grids in the extractor hood.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
Changing the LED lamps
• Remove the metal grease filters.
• Unscrew the lamps and replace them with new ones having the
same characteristics.
• Replace the metal grease filters.
Socket
Voltage (V)
E14
220-240
Dimension (mm)
107 x 37
DRBB/F-4-220-240-E14-35/100
ILCOS Code
EN 7
Publicité
